Bonjour,
Je n’arriver pas a installer mon scanner Epson Perfection V600 sous raspbian dernière version
Je me base sur ce tuto :
https://www.raspberrypi.org/forums/viewtopic.php?f=36&t=109169
Driver Epson :
http://download.ebz.epson.net/dsc/search/01/search/
SANE:
External Backends (Drivers)
http://www.sane-project.org/lists/sane-backends-external.html
Mon scanner : Tester sous Linux Debian OK
Perfection V600 Photo USB 0x04b8/0x013a Good requires DFSG non-free iscan-plugin-gt-x820 overseas version of the GT-X820
Sous Rasbian an mode console :
pi@PrintServer01:~ $ lsusb
Bus 001 Device 006: ID 04b8:013a Seiko Epson Corp. GT-X820 [Perfection V600 Photo]
Bus 001 Device 005: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 004: ID 25a7:0701
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@PrintServer01:~ $ sudo sane-find-scanner
Sane-find-scanner will now attempt to detect your scanner. If the result is different from what you expected, first make sure your scanner is powered up and properly connected to your computer.
No SCSI scanners found. If you expected something different, make sure that you have loaded a kernel SCSI driver for your SCSI adapter.
Also you need support for SCSI Generic (sg) in your operating system.
If using Linux, try « modprobe sg ».
found USB scanner (vendor=0x04b8 [EPSON], product=0x013a [EPSON Scanner]) at libusb:001:006
found USB scanner (vendor=0x0424, product=0xec00) at libusb:001:003
Your USB scanner was (probably) detected. It may or may not be supported by
SANE. Try scanimage -L and read the backend’s manpage.
Not checking for parallel port scanners.
Most Scanners connected to the parallel port or other proprietary ports
can’t be detected by this program.
pi@PrintServer01:~ $ sudo scanimage -L
No scanners
were identified. If you were expecting something different,check that the
scanner is plugged in, turned on and detected by the sane-find-scanner tool (if
appropriate). Please read the documentation which came with this software
(README, FAQ, manpages).
J’ai bien ajouté les entrées /etc/sane.d: epson2.conf.
usb 0x4b8 0x13a
Merci